Sync Orbi Satellite: A Compressive Guide (2024)

The Orbi mesh system is the advanced system that provides seamless and fast internet speed in the entire home. There is one main node called a router, and another is all called a satellite. All the satellites connect with the main router. In today’s article, we discuss in detail how to sync Orbi satellite to the router.

Physically Install the Orbi Devices

To physically install the Orbi devices, first of all you need to place the router and then sync Orbi satellite to the router. You can make any one of the Orbi devices a router. To install, follow the steps given below:

1. Keep the router close to the modem and in a place where there is no interference.
2. Then connect the router to the modem with the help of an Ethernet cable.
3. After that, turn on the router and modem.

Before connecting the satellite, configure the router via the Orbi app or via the web interface. Follow the further steps to configure the router.

1. Place the satellite close to the router and turn it on.
2. Press the sync button of the router, and within 2 minutes, press the sync button of the satellite.

After installation of the router and the satellite, configure all the sync Orbi satellite via the app or manually.

Configure Router and Satellite Manually.

1. Attach your computer device to the network of the Orbi with an Ethernet cable or wirelessly.
2. Go to any web browser and enter Orbilogin.com or Orbilogin.net or the IP address 192.168.1.1 into the address bar.
3. Enter the default login detail into the field and click on the login.
4. Now you are entering in the web interface of the Orbi devices.
5. Create the SSID and password for the Orbi network in the settings tab.
6. Use this SSID and the password to connect the devices.

On this web interface, you can adjust all the settings of the Orbi devices, such as changing passwords, updating firmware, and changing WiFi channels. There is another menthod to configure the devices by Orbi app

Configure via Orbi App

1. Download and install the Orbi app.
2. Connect your  Orbi device to the network of Orbi.
3. Open the app and login with the default username and password.
4. Now you will enter a dashboard. Tap on the GET STARTED button.
5. Enable the camera and scan the QR code, which is pasted on the backside of the device.
6. Select the modem and serial number of the router, and tap on the CONTINUE option.
7. Now the app is searching for an Orbi router to pair.
8. Set the SSID and password for the Orbi network.
9. When the app successfully pairs the router, you connect all the other Orbi devices by using these same steps.

By using these, you can easily Sync Orbi satellite and routers to the app. On this, you can also adjust the settings of the Orbi devices.

Troubleshooting Tips

Sometime users face some issues while setting up the Orbi devices, such as the Orbi satellite not connecting and not working. If you are also facing issues, then you need to take troubleshooting tips to solve them.

1. Make sure devices are getting proper power supply.
2. Check there is no damage in the network and power cables.
3. All the wires connected correctly or properly.
4. Ensure your devices are connected to the network of the Orbi.
5. Use the correct instruction to configure the ORBI devices.
6. Place the satellite near the router.

By following these steps, you can solve all the issues related to setting up the Bluetooth devices. And easily sync Orbi satellite to the router.

Conclusion

After reading this article, you can easily setup the entire Orbi device by yourselves at home. You just need to follow all the devices carefully. Read more