Setek WiFi Extender to Setup a Right Instruction

Setek extender helps to boost your home network and provide reliable internet signals at every corner of your house. You can connect the Setek WiFi extender to any router. But before using this, you need to setup the setek extender. This article provides you complete instructions to setup the extender. Follow all the steps carefully:

Steps to Setup Setek Extender

1. Unboxing the Extender

First of all, open the box. You will find a setek extender inside the box; it looks like an adapter. You can simply plug it, but follow the process step by step.

2. Place and Connect

Place the extender close to the router and connect with the help of the Ethernet cable to the router. Ensure that the router and modem are turned off during the connection. After making an Ethernet connection, plug in the extender to the power socket. Then turn on the extender, router, and modem.

3. Configure Via the Computer

After completing the physical setup, you need to configure the router via the computer. This method is also known as manual setup. To complete the configure process, follow the steps given below:

1. Firstly, connect your computer device to the network of the setek extender.
2. There is no password needed to connect.
3. Go to the web browser and type the IP address 192.168.10.1 into the address bar.
4. Here, you will see the login page. Enter the default login detail to login.
5. After logging in, you will see the web interface of the setek extender.
6. Now select the network of the router that you want to extend.
7. Enter the password of the router and click on the connect button.

After following these steps, you can easily complete the setek wifi extender to the router. You can adjust the settings of the extender on this web interface, such as updating the firmware, seeing the list of devices that connected to the extender, and changing the wifi channels.

Troubleshooting Issues and Their Solution

If you are facing issues while installing and logging in to Setek Extender. There are many reasons behind these issues. You need to follow some precautions and tips to successfully setup the Setek wifi extender.

Issue during Install

If there are issues during the installation process, follow the steps given below to solve them.

1. Check the power cables are properly connected to the power socket.
2. Connect the Ethernet cable correctly on both the router and extender sides.
3. Ensure that there is not any damage to any cable.
4. Make sure that the router and the extender are getting proper power supply.

Follow all the steps to ensure that all the power and network cable connections are in good condition.

Unable to Login

Many times, users install the setek extender but face problems while logging in. There are different reasons why this issue is happening. Solve this by following the steps given below:

1. Make sure you are using the correct version of the web browser.
2. Clear all the cookies and cache of the browser.
3. Temporary disable firewall and proxy software. Sometimes they create issues while logging in.
4. If you are not able to login with one browser, then use the different web browser.
5. Ensure that your device is connected to the network of the setek extender.
6. Use the correct IP address to access the interface, and use the correct credential to login.

Ensure that the entire above requirement is fulfilled by you to smoothly login to the Setek WiFi extender.

Conclusion

This article is the best guide for you to setup the Setek WiFi extender by yourselves. Follow the given troubleshooting to solve the issues.

read more: